-- *****************************************************************
-- The interim Chassis MIB for Rhino ATM switch
--
-- Nov 1995, Yunsen Wang
--
-- Copyright (c) 1996-1997, 1998, 1999, 2000 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--CISCO-RHINO-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,Counter32,Gauge32,Integer32FROM SNMPv2-SMI
TEXTUAL-CONVENTION,TimeStamp,
DisplayString,TruthValueFROM SNMPv2-TC
InterfaceIndexFROM IF-MIB
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF
ifIndex
FROM RFC1213-MIB
workgroup
FROM CISCO-SMI
Unsigned32FROM CISCO-TC;ciscoLS1010ChassisMIB MODULE-IDENTITYLAST-UPDATED"200103290000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-atm@cisco.com"DESCRIPTION"-Added enum sixPortDS3 for ciscoLS1010SubModuleType.
-Added enum nodeSwitchProcessor2ndGeneration for
ciscoLS1010ModuleType.
-Added enum ac175W for psType.
-Added Group object for Notification objects."REVISION"200103290000Z"DESCRIPTION"-Added enum ACL Daughter card SubModuleType for
Cat8540.
-Added enum for TS Carrier Module.
-Added enum for medium SingleModeLRFiber for
OC3 and OC12 ATM pams."REVISION"200102150000Z"DESCRIPTION"-Added object for module hardware minor version.
-Added objects for module and submodule serial
number in string format.
-Deprecated integer serial number objects for module
and submodule.
-Added enumeration to submodule type for
NRP2 for 6400.
-Reduce to single Module Compliance for clarity."REVISION"200007200000Z"DESCRIPTION"Added enums XPIF GE, ATM, and POS SubModuleTypes for
Cat8540c. Added enums cmpmCarrier ModuleType for
Cat8540c."REVISION"200004110000Z"DESCRIPTION"Added enums in ChassisSysType & ChassisBkplType for
Cat4908g"REVISION"200002070000Z"DESCRIPTION"Added enums for OC48c LR, and Dual Slot modules."REVISION"9911300000Z"DESCRIPTION"Added enums for OC48c and ARM modules."REVISION"9910040000Z"DESCRIPTION"Added enums in ChassisSysType & ChassisBkplType for
C2948."REVISION"9906290000Z"DESCRIPTION"Added enums in subModuleType for the IMA & ATM25M4P
PAMs."REVISION"9906170000Z"DESCRIPTION"Added enumerations for Cat6k"REVISION"9903120000Z"DESCRIPTION"Added enumerations for TGX8750."REVISION"9812020000Z"DESCRIPTION"Consolidate changes from C6400, C8500, FR-PAM,
new modules."REVISION"9810260000Z"DESCRIPTION"Added new enum c8510. Also new tables for enet
ports and LEDs."REVISION"9807130000Z"DESCRIPTION"Rhino ATM Switch Chassis MIB"REVISION"9711200000Z"DESCRIPTION"Added ciscoAtmInterceptEndToEndOamFlow. Editorial changes."REVISION"9707220000Z"DESCRIPTION"Added clocking objects "REVISION"9702040000Z"DESCRIPTION"Added object ciscoLS1010SubModuleHwVersionMinor."REVISION"9610020000Z"DESCRIPTION"Added a new PsType for -48 VDC."REVISION"9510020000Z"DESCRIPTION"Initial version of this MIB module."::={ workgroup 11}
ciscoLS1010ChassisMIBObjects OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIB 1}ciscoLS1010ChassisGroup OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIBObjects 1}ciscoLS1010ModuleGroup OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIBObjects 2}ciscoLS1010SubModuleGroup OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIBObjects 3}ciscoLS1010PortGroup OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIBObjects 4}ciscoLS1010CpuSwitchGroup OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIBObjects 5}clsEnetPortGroup OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIBObjects 6}clsPortLedGroup OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIBObjects 7}
PsType ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Power Supply type"SYNTAXINTEGER{ powerone(0),-- vendorastec(1),minus48VDC(2),empty(3),-- not presentac1100W(4),-- C5500ac1200W(5),-- C5500dc1200W(6),-- C5500
pem(7),-- C6400, DC Power entry moduleac1360W(8),dc1360W(9),ac2000W(10),dc2000W(11),acpem(12),--C6400,AC Power entry moduleac175W(13)-- Domino}OperStatus ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Operational status of a chassis component.
fanAlarm(4) is only applicable to the C5500 power supply.
A fault(3) supercedes a fanAlarm(4).
partialFault(5) & empty(6) are used by the Cisco6400 for the
fan status to indicate partial fans failure & fan not present.
A fault(3) value indicates total fans failure in the C6400."SYNTAXINTEGER{ unknown(1),-- none of the followingok(2),-- status okfault(3),-- major problemfanAlarm(4),-- for C5500 power supplypartialFault(5),-- partial failureempty(6)-- not present}AdminStatus ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Admin status of a chassis component."SYNTAXINTEGER{ enable(1),disable(2),reset(3)}Led ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"LED status"SYNTAXINTEGER{ off(1),green(2),red(3),yellow(4),blinkgreen(5),blinkyellow(6),blinkred(7),unknown(8)
}PcmciaType ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"PCMCIA card type"SYNTAXINTEGER{ unknown(1),-- vendorempty(2),-- not presentflash(3),disk(4)}-- the chassis groupciscoLS1010ChassisSysType OBJECT-TYPESYNTAXINTEGER{other(1),-- none of the followingls1010(2),
c8510(3),cisco6400(4),c8540(5),tgx8750(6),wsx6302(7),-- C6K Multilayer Switchc2948g(8),c4908g(9)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The chassis system type."::={ ciscoLS1010ChassisGroup 1}ciscoLS1010ChassisBkplType OBJECT-TYPESYNTAXINTEGER{other(1),-- none of the following
atm(2),-- LS1010 chassisc5500(3),-- Catalyst5500 chassiscisco6400(4),c8510(5),c8540(6),tgx8750(7),cat6000(8),-- C6K Multilayer Switchc2948g(9),c4908g(10)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The chassis backplane type."
::={ ciscoLS1010ChassisGroup 2}ciscoLS1010ChassisPs0Type OBJECT-TYPESYNTAX PsType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Type of power supply number 1."::={ ciscoLS1010ChassisGroup 3}ciscoLS1010ChassisPs0AdminStatus OBJECT-TYPESYNTAX AdminStatus
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Enable or disable power supply 1."::={ ciscoLS1010ChassisGroup 4}ciscoLS1010ChassisPs0Status OBJECT-TYPESYNTAX OperStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Status of power supply number 1."
::={ ciscoLS1010ChassisGroup 5}ciscoLS1010ChassisPs0Led OBJECT-TYPESYNTAX Led
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"LED Status of power supply number 1."::={ ciscoLS1010ChassisGroup 6}ciscoLS1010ChassisPs1Type OBJECT-TYPESYNTAX PsType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Type of power supply number 2."::={ ciscoLS1010ChassisGroup 7}ciscoLS1010ChassisPs1AdminStatus OBJECT-TYPESYNTAX AdminStatus
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Enable or disable power supply 2."::={ ciscoLS1010ChassisGroup 8}
ciscoLS1010ChassisPs1Status OBJECT-TYPESYNTAX OperStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Status of power supply number 2."::={ ciscoLS1010ChassisGroup 9}ciscoLS1010ChassisPs1Led OBJECT-TYPESYNTAX Led
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"LED Status of power supply number 2."::={ ciscoLS1010ChassisGroup 10}ciscoLS1010ChassisFanStatus OBJECT-TYPESYNTAX OperStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Status of the chassis fan."::={ ciscoLS1010ChassisGroup 11}ciscoLS1010ChassisFanLed OBJECT-TYPE
SYNTAX Led
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"LED Status of fan."::={ ciscoLS1010ChassisGroup 12}ciscoLS1010ChassisCardStatusLed OBJECT-TYPESYNTAX Led
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"LED Status of CPU card."::={ ciscoLS1010ChassisGroup 13}ciscoLS1010ChassisEnetLinkLed OBJECT-TYPESYNTAX Led
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Ethernet link status LED of CPU card."::={ ciscoLS1010ChassisGroup 14}ciscoLS1010Chassis12VoltStatus OBJECT-TYPESYNTAXINTEGER{ok(1),outOfTolerance(2),unknown(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The chassis 12V status."::={ ciscoLS1010ChassisGroup 15}ciscoLS1010ChassisTempStatus OBJECT-TYPESYNTAXINTEGER{ok(1),overTemperature(2),minorWarning(3),-- Used by C6400majorWarning(4),-- Used by C6400
criticalWarning(5)-- Used by C6400}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The chassis temperature status.
The values of minorWarning(3), majorWarning(4) and
criticalWarning(5) will be primarily used by C6400
to indicate the core temperature. C6400 will never
report overTemperature(2) status.
In C6400 there are two temperature sensors: core
and inlet. C6400 use this object to represent the
core temperature and the other object
ciscoLS1010ChassisInletTempStatus to represent the
inlet temperature."::={ ciscoLS1010ChassisGroup 16}ciscoLS1010ChassisPcmciaSlot0Type OBJECT-TYPESYNTAX PcmciaType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Type of PCMCIA slot 0 type."::={ ciscoLS1010ChassisGroup 17}
ciscoLS1010ChassisPcmciaSlot1Type OBJECT-TYPESYNTAX PcmciaType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Type of PCMCIA slot 1 type."::={ ciscoLS1010ChassisGroup 18}ciscoLS1010ChassisNumSlots OBJECT-TYPESYNTAXINTEGER(1..16)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of slots in the chassis for plug-in modules."::={ ciscoLS1010ChassisGroup 19}ciscoLS1010ChassisLastChange OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The last time chassis physical content get changed."
::={ ciscoLS1010ChassisGroup 20}ciscoLS1010ChassisFailureAction OBJECT-TYPESYNTAXINTEGER{nothing(1),sendTrap(2),shutdown(3),sendTrapAndShutdown(4)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The action to take when there is any chassis failure,
which includes either power supply, voltage,
temperature and fan failure."DEFVAL{ sendTrapAndShutdown }::={ ciscoLS1010ChassisGroup 21}ciscoLS1010ChassisChangeAction OBJECT-TYPE
SYNTAXINTEGER{nothing(1),sendTrap(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The action to take when there is any chassis change,
which includes either power supply, fan and boards."DEFVAL{ sendTrap }::={ ciscoLS1010ChassisGroup 22}ciscoLS1010ChassisClockingMode OBJECT-TYPESYNTAXINTEGER{ revertive(1), nonRevertive(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The clocking mode of the ls1010 system. By default,
the mode is non-revertive, which means that the clock
will stick to the current priority, even though higher
priority clock is available."::={ ciscoLS1010ChassisGroup 23}ciscols1010SystemClockSourceStatus OBJECT-TYPESYNTAXINTEGER{ notSelected(1),selected(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The network clock source status of 'system' source:
'notSelected' indicates 'system' not selected as the
network clock source.
'selected' indicates ASP freerunning(system) is selected as
network clock source. "::={ ciscoLS1010ChassisGroup 24}ciscols1010SystemClockSourcePriority OBJECT-TYPESYNTAXINTEGER{ priority1(1),
priority2(2),priority3(3),priority4(4),priority5(5)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The highest priority at which 'system' is configured as
a network clock source. "::={ ciscoLS1010ChassisGroup 25}ciscoLS1010ChassisInletTempStatus OBJECT-TYPESYNTAXINTEGER{ ok(1),overTemperature(2),minorWarning(3),majorWarning(4),
criticalWarning(5),unknown(6)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"C6400 has two temperature sensors: core and
inlet. C6400 use this object to represent the
inlet temperature and use the object
ciscoLS1010ChassisTempStatus to represent the
core temperature."::={ ciscoLS1010ChassisGroup 26}-- the module groupciscoLS1010ModuleTable OBJECT-TYPESYNTAXSEQUENCEOF CiscoLS1010ModuleEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A list of module entries. The number of entries is
given by the value of ciscoLS1010ChassisNumSlots."::={ ciscoLS1010ModuleGroup 1}
ciscoLS1010ModuleEntry OBJECT-TYPESYNTAX CiscoLS1010ModuleEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Entry containing information about one module in a
slot of the chassis."INDEX{ ciscoLS1010ModuleIndex }::={ ciscoLS1010ModuleTable 1}
CiscoLS1010ModuleEntry ::=SEQUENCE{
ciscoLS1010ModuleIndex
INTEGER,
ciscoLS1010ModuleType
INTEGER,
ciscoLS1010ModuleSerialNumber
Integer32,
ciscoLS1010ModuleHwVersion
Integer32,
ciscoLS1010ModuleSwVersion
Integer32,
ciscoLS1010ModuleDescr
DisplayString,
ciscoLS1010ModuleNumSubModules
INTEGER,
ciscoLS1010ModuleAdminStatus
AdminStatus,
ciscoLS1010ModuleOperStatus
OperStatus,
ciscoLS1010ModuleHwVersionMinor
Unsigned32,
ciscoLS1010ModuleSerialNumberString
DisplayString}ciscoLS1010ModuleIndex OBJECT-TYPESYNTAXINTEGER(0..15)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A unique value for each module."::={ ciscoLS1010ModuleEntry 1}ciscoLS1010ModuleType OBJECT-TYPESYNTAXINTEGER{other(1),-- none of the following
carrier(2),cpuSwitchAndFeature(3),-- FC1cpuSwitchAndFeaturePFQ(4),-- FC-PFQsuperCarrier(5),cpuRoute(6),-- routing processorswitch10GAndFC(7),-- 10 gigabit switch fabric-- with feature card optionswitch10GNoFC(8),-- 10 gigabit switch fabric-- w/o feature card optionatmFabricIntegration(9),-- on C5500dualSlot(10),-- Dual slot module for OC48c
cmpmCarrier(11),-- CMPM module in 8540ctsCarrier(12),-- TS Carrier ModulenodeSwitchProcessor2ndGeneration(13)--NSP2}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The type of module."::={ ciscoLS1010ModuleEntry 2}ciscoLS1010ModuleSerialNumber OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The serial number of the module.
Deprecated in favor of object
ciscoLS1010ModuleSerialNumberString. This object
returns 0 for modules using an alphanumeric
numbering scheme."::={ ciscoLS1010ModuleEntry 3}
ciscoLS1010ModuleHwVersion OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The hardware version of the module."::={ ciscoLS1010ModuleEntry 4}ciscoLS1010ModuleSwVersion OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The software version number."::={ ciscoLS1010ModuleEntry 5}ciscoLS1010ModuleDescr OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A descriptive string used by the agent
to describe the module."
::={ ciscoLS1010ModuleEntry 6}ciscoLS1010ModuleNumSubModules OBJECT-TYPESYNTAXINTEGER(0..255)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The max number of sub-modules supported by this module."::={ ciscoLS1010ModuleEntry 7}ciscoLS1010ModuleAdminStatus OBJECT-TYPESYNTAX AdminStatus
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object, when read, always returns a value of
ok(1). Setting this object to one of the
acceptable values gives the following results:
reset: reset the module's control logic
enable: enable the module
disable: disable the module
Setting this object to any other values results in
an error."::={ ciscoLS1010ModuleEntry 8}
ciscoLS1010ModuleOperStatus OBJECT-TYPESYNTAX OperStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Operational status of the module."::={ ciscoLS1010ModuleEntry 9}ciscoLS1010ModuleHwVersionMinor OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The minor hardware version of the module."::={ ciscoLS1010ModuleEntry 10}ciscoLS1010ModuleSerialNumberString OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The serial number of the module."
::={ ciscoLS1010ModuleEntry 11}-- the sub-module groupciscoLS1010SubModuleTable OBJECT-TYPESYNTAXSEQUENCEOF CiscoLS1010SubModuleEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A list of sub-module entries. The number of entries is
given by the value of ciscoLS1010SlotNumSubModules."::={ ciscoLS1010SubModuleGroup 1}ciscoLS1010SubModuleEntry OBJECT-TYPESYNTAX CiscoLS1010SubModuleEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Entry containing information about one sub-module in a
sub-slot of the module."INDEX{ ciscoLS1010ModuleIndex,
ciscoLS1010SubModuleIndex }::={ ciscoLS1010SubModuleTable 1}
CiscoLS1010SubModuleEntry ::=SEQUENCE{
ciscoLS1010SubModuleIndex
INTEGER,
ciscoLS1010SubModuleType
INTEGER,
ciscoLS1010SubModuleSerialNumber
Integer32,
ciscoLS1010SubModuleHwVersion
Integer32,
ciscoLS1010SubModuleSwVersion
Integer32,
ciscoLS1010SubModuleDescr
DisplayString,
ciscoLS1010SubModuleNumPorts
INTEGER,
ciscoLS1010SubModuleAdminStatus
INTEGER,
ciscoLS1010SubModuleHwVersionMinor
Integer32,
ciscoLS1010SubModuleOperStatus
OperStatus,
ciscoLS1010SubModuleSerialNumberString
DisplayString}ciscoLS1010SubModuleIndex OBJECT-TYPESYNTAXINTEGER(0..15)
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A unique value for each sub-module within the module.
This value is determined by sub-slot number where the
sub-module is inserted."::={ ciscoLS1010SubModuleEntry 1}ciscoLS1010SubModuleType OBJECT-TYPESYNTAXINTEGER{other(1),-- none of the followingoc3Utp5(2),oc3SingleModeFiber(3),oc3MultiModeFiber(4),oc12SingleModeFiber(5),oc12MultiModeFiber(6),
ds3(7),e3(8),cpuSwitch(9),featureFpga(10),featureAsic(11),t1(12),e1(13),e1bnc(14),oc3Mixed(15),cbrt1(16),cbr120e1(17),cbr75e1(18),quadDs3(19),
quadE3(20),dualDs3(21),dualE3(22),oc12Mixed(23),atm25(24),featurePVC(25),routerProcessorAlpha(26),-- Cisco6400 NRP carddualOC3SingleModeIRFiber(27),-- Cisco 6400-- Line carddualOC3MultiModeIRFiber(28),routerProcessorBeta(29),-- Cisco6400
-- NRP2 card-- FR/FUNI Frame Port Adaptersfratm1CT3(30),fratm4CE1(31),-- more ATM port adaptersoc3SingleModeLRFiber(35),oc12SingleModeLRFiber(36),sixPortDS3(37),feUTP8p16k(40),-- 8 port fast ethernet UTPfeUTP8p64k(41),feMMF8p16k(42),-- 8 port fast ethernet fiberfeMMF8p64k(43),feUTP16p16k(44),-- 16 port fast ethernet UTP
feUTP16p64k(45),feMMF16p16k(46),-- 16 port fast ethernet fiberfeMMF16p64k(47),geF1p16k(48),-- 1 port gigabit ethernet fibergeF1p64k(49),geF2p16k(50),-- 2 port gigabit ethernet fibergeF2p64k(51),feBridge4p(52),-- fast ethernet bridge cardfeUTP8p16kFullDup(53),-- 8 port UTP full duplexfeUTP8p64kFullDup(54),
routeProc(55),-- routing processorswitch10GProc(56),-- 10G switching processorfeatureNetClock(57),-- network clock FCfeatureABR(58),-- ABR relative rate FCgeF8p64k(59),-- 8 port gig-ether fiber-- cat8540featureLite(60),-- c8540MSR Port Adapterss16pOC3MM(61),s16pOC3SM(62),s4pOC12MM(63),s4pOC12SM(64),
atmIma8pT1(65),atmIma8pE1(66),atm25m4p(67),s1pOC48cSM(68),s1pOC48cSMLR(69),-- cat5500 Bridge cardatmFIMBridge(70),atmFIMoc12MM(71),-- ATM Router Module cardarm1p64k(80),arm2p64k(81),-- 8540c XPIF Giga Ethernet Module (Barracuda)xpif1pGE16k(82),
xpif1pGE64k(83),xpif1pGE256k(84),-- 8540c XPIF ATM OC12/3 Module card (Garfield)xpifAtm1pOC12SMIR64k(85),xpifAtm1pOC12SMIR256k(86),xpifAtm1pOC12MM64k(87),xpifAtm1pOC12MM256k(88),xpifAtm1pOC3SMIR64k(89),xpifAtm1pOC3SMIR256k(90),xpifAtm1pOC3MM64k(91),xpifAtm1pOC3MM256k(92),-- 8540c XPIF POS OC12 Module card (POS)
xpifPos1pOC12SMIR64k(93),xpifPos1pOC12SMIR256k(94),xpifPos1pOC12SMLR64k(95),xpifPos1pOC12SMLR256k(96),-- ATM Router Module (XPIF) cardxpifArm2p256k(97),-- ACL Daughter card for EPIF and GPIFaclDaughter(98)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The type of sub-module."::={ ciscoLS1010SubModuleEntry 2}ciscoLS1010SubModuleSerialNumber OBJECT-TYPESYNTAXInteger32
MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The serial number of the sub-module.
Deprecated in favor of object
ciscoLS1010SubModuleSerialNumberString. This
object returns 0 for submodules using
an alphanumeric numbering scheme."::={ ciscoLS1010SubModuleEntry 3}ciscoLS1010SubModuleHwVersion OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The major hardware version of the sub-module.
Together with ciscoLS1010SubModuleHwVersionMinor,
this completely specifies the hardware version of
the sub-module."::={ ciscoLS1010SubModuleEntry 4}ciscoLS1010SubModuleSwVersion OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The software version number."::={ ciscoLS1010SubModuleEntry 5}ciscoLS1010SubModuleDescr OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A descriptive string used by the agent
to describe the module."::={ ciscoLS1010SubModuleEntry 6}ciscoLS1010SubModuleNumPorts OBJECT-TYPESYNTAXINTEGER(0..255)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The maximum number of ports supported by
this sub-module."::={ ciscoLS1010SubModuleEntry 7}
ciscoLS1010SubModuleAdminStatus OBJECT-TYPESYNTAXINTEGER{ reset(1), ok(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object can be read/written as reset or ok."::={ ciscoLS1010SubModuleEntry 8}ciscoLS1010SubModuleHwVersionMinor OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The minor hardware version of the sub-module.
Together with ciscoLS1010SubModuleHwVersion,
this completely specifies the hardware version of
the sub-module."::={ ciscoLS1010SubModuleEntry 9}ciscoLS1010SubModuleOperStatus OBJECT-TYPESYNTAX OperStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Operational status of the submodule."::={ ciscoLS1010SubModuleEntry 10}ciscoLS1010SubModuleSerialNumberString OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The serial number of the sub-module."::={ ciscoLS1010SubModuleEntry 11}-- the port groupciscoLS1010PortTable OBJECT-TYPESYNTAXSEQUENCEOF CiscoLS1010PortEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A list of port entries. The number of entries is
determined by the number of modules in the chassis,
the number of sub-module in the module
and the number of ports on each sub-module."::={ ciscoLS1010PortGroup 1}ciscoLS1010PortEntry OBJECT-TYPESYNTAX CiscoLS1010PortEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Entry containing information for a particular port on
a sub-module."INDEX{ ciscoLS1010ModuleIndex,
ciscoLS1010SubModuleIndex,
ciscoLS1010PortIndex }::={ ciscoLS1010PortTable 1}
CiscoLS1010PortEntry ::=SEQUENCE{
ciscoLS1010PortIndex
INTEGER,
ciscoLS1010PortIfIndex
InterfaceIndex}ciscoLS1010PortIndex OBJECT-TYPESYNTAXINTEGER(0..255)
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An index value that uniquely identifies this port within
a sub-module. The value is determined by the location of
the port on the sub-module. Valid entries are 1 to the
value of subModuleNumPorts for this sub-module."::={ ciscoLS1010PortEntry 1}ciscoLS1010PortIfIndex OBJECT-TYPESYNTAXInterfaceIndexMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The ifIndex value assigned to this port."::={ ciscoLS1010PortEntry 2}-- the ethernet port groupclsEnetPortTable OBJECT-TYPESYNTAXSEQUENCEOF ClsEnetPortEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"A list of ethernet port entries. This table
is mainly to support ethernet port only."::={ clsEnetPortGroup 1}clsEnetPortEntry OBJECT-TYPESYNTAX ClsEnetPortEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Entry contains information of a particular
ethernet port."INDEX{ ifIndex }::={ clsEnetPortTable 1}
ClsEnetPortEntry ::=SEQUENCE{
clsEnetPortDuplex INTEGER,
clsEnetPortAdminSpeed INTEGER,
clsEnetPortType INTEGER,
clsEnetPortLinkStatus INTEGER}clsEnetPortDuplex OBJECT-TYPESYNTAXINTEGER{unknown(1),-- not applicable or otherauto(2),-- auto negotiationhalf(3),-- half duplexfull(4)-- full duplex}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicates whether the port is operating
in half-duplex, full-duplex, or auto mode.
If the port could not agree with the far end on
port duplex, the port will be in auto(2) mode.
Unknown(1) indicates either the port does not
support duplex mode, or the duplex mode is
none of the defined."::={ clsEnetPortEntry 1}clsEnetPortAdminSpeed OBJECT-TYPESYNTAXINTEGER{unknown(1),-- not applicable or otherauto(2),-- auto negotiatione10Mbps(3),-- 10 Mbpse100Mbps(4),-- 100 Mbpse1000Mbps(5)-- 1000 Mbps}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicates the desired speed of the port
in bits per second.
The current operational speed of the port
is determined by ifSpeed.
If the port could not agree with the far end on
port speed, the port will be in auto(2) mode,
which will force the port to transmit in speed
whichever is lower.
Unknown(1) indicates either the port does not
support admin speed, or the admin speed is
none of the defined."::={ clsEnetPortEntry 2}clsEnetPortType OBJECT-TYPESYNTAXINTEGER{unknown(1),-- empty or othere100BaseTX(2),-- UTP fast Ethernete100BaseFX(3),-- Fiber fast Ethernete1000BaseLX(4),-- Long Wave SMF Giga Ethernete1000BaseSX(5),-- Short Wave MMF Giga Ethernetempty(6)-- port not present}MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The type of physical layer medium-dependent
interface on the port.
unknown(1) indicates that the port type is none of
those defined. empty(6) indicates that the port is
not present."::={ clsEnetPortEntry 3}clsEnetPortLinkStatus OBJECT-TYPESYNTAXINTEGER{unknown(1),-- not applicable or otherautoNegotiate(2),forceUp(3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object indicates how the link status
of the port came up.
autoNegotiate(2) -- the port will try to
negotiate the link with the partner port.
If successful, the link will come up,
otherwise the link will remain down.
forceUp(3) -- the port will force the link
up irrespective of its partner port. This
will bring up the link in full duplex only.
Default is autoNegotiate(2)."::={ clsEnetPortEntry 4}-- the port LED groupclsPortLedTable OBJECT-TYPESYNTAXSEQUENCEOF ClsPortLedEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A list of LED entries associated with a port."::={ clsPortLedGroup 1}clsPortLedEntry OBJECT-TYPESYNTAX ClsPortLedEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Entry contains information of a particular
LED associated with a particular port which
is identified by ifIndex."INDEX{ ifIndex, clsPortLedIndex }::={ clsPortLedTable 1}
ClsPortLedEntry ::=SEQUENCE{
clsPortLedIndex INTEGER,
clsPortLedType INTEGER,
clsPortLedStatus INTEGER}clsPortLedIndex OBJECT-TYPESYNTAXINTEGER(1..255)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An index that uniquely identifies this LED
among all the LEDs associated with the port
identified by ifIndex.
This value is related to the physical location
of the LED, and is in ascending order from
top to bottom, left to right."::={ clsPortLedEntry 1}
clsPortLedType OBJECT-TYPESYNTAXINTEGER{ledTx(1),-- transmitledRx(2),-- receiveledLink(3),-- link statusled100Mbps(4),-- port speedledRxLoss(5),-- Rx cell lossledRxFullOut(6),-- Rx cell full outledRxSync(7),-- Rx syncledFullDuplex(8),-- full duplexledOptDetect(9)-- optical detect
}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the type or label of the LED."::={ clsPortLedEntry 2}clsPortLedStatus OBJECT-TYPESYNTAXINTEGER{unknown(1),-- not supported or otheron(2),off(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the status of the LED.
Unknown(1) indicates either the LED status is
not supported or the status is none of the
defined."::={ clsPortLedEntry 3}-- the CPU/switch fabric groupciscoAtmCpuAdminStatus OBJECT-TYPESYNTAXINTEGER{ reset(1), ok(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Reset will reload the CPU board."::={ ciscoLS1010CpuSwitchGroup 1}ciscoAtmSwitchTotalBuffer OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total cell buffer count in switch's shared memory."::={ ciscoLS1010CpuSwitchGroup 2}ciscoAtmSwitchFreeBuffer OBJECT-TYPE
SYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The free cell buffer count in switch's shared memory."::={ ciscoLS1010CpuSwitchGroup 3}ciscoAtmSwitchDiscardCells OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total discarded cells of the switch."::={ ciscoLS1010CpuSwitchGroup 4}ciscoAtmSwitchInvalidCells OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total invalid cells of the switch."::={ ciscoLS1010CpuSwitchGroup 5}ciscoAtmSwitchInvalidCellHeaderTable OBJECT-TYPE
SYNTAXSEQUENCEOF CiscoAtmSwitchInvalidCellHeaderEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A list of invalid cell header entries."::={ ciscoLS1010CpuSwitchGroup 6}ciscoAtmSwitchInvalidCellHeaderEntry OBJECT-TYPESYNTAX CiscoAtmSwitchInvalidCellHeaderEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"a entry of invalid cell header."INDEX{ ciscoAtmSwitchInvalidCellHeaderIndex }::={ ciscoAtmSwitchInvalidCellHeaderTable 1}
CiscoAtmSwitchInvalidCellHeaderEntry ::=SEQUENCE{
ciscoAtmSwitchInvalidCellHeaderIndex
INTEGER,
ciscoAtmSwitchInvalidCellHeader
OCTETSTRING
}ciscoAtmSwitchInvalidCellHeaderIndex OBJECT-TYPESYNTAXINTEGER(1..64)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A sequence number that identifies a invalid cell header
entry in the table."::={ ciscoAtmSwitchInvalidCellHeaderEntry 1}ciscoAtmSwitchInvalidCellHeader OBJECT-TYPESYNTAXOCTETSTRING(SIZE(5))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The most recently received invalid cells header.
octet 0 is port number (0-32),
octet 1 bit 7-5 is PTI,
octet 1 bit 4 is CLP,
octet 1 bit 3-0 is GFC,
octet 2 is VPI,
octet 3 is high byte of VCI
octet 4 is low byte of VCI."::={ ciscoAtmSwitchInvalidCellHeaderEntry 2}ciscoAtmCpuTerminateOamFlow OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUSobsolete-- superseded by ciscoAtmCpuTerminateVpOamFlowDESCRIPTION"Terminate all the incoming OAM cells to the CPU port."DEFVAL{ false }-- no oam flow termination, by default::={ ciscoLS1010CpuSwitchGroup 7}ciscoAtmInterceptEndToEndOamFlow OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicates whether incoming end-to-end OAM flow
cells are sent to the switch CPU.
If the value is 'true', all incoming
end-to-end OAM flow cells, including those on
transit connections, are sent to the switch
CPU.
This value may be modified at any time. The
modified value will apply to all existing
connections.
Note that if the value is 'false', the switch
can not use the ATM PING application for
end-to-end loopback on transit connections,
since the end-to-end OAM cells on such connections
will not be seen by the switch CPU."DEFVAL{ true }::={ ciscoLS1010CpuSwitchGroup 8}-- the following two OBJECT IDENTIFIERS are used to define SNMPv2 Notifications
-- that are backward compatible with SNMPv1 Traps.ciscoLS1010ChassisMIBNotificationPrefix OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIB 2}ciscoLS1010ChassisMIBNotifications OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIBNotificationPrefix 0}
ciscoLS1010ChassisFailureNotification NOTIFICATION-TYPEOBJECTS{
ciscoLS1010ChassisPs0Status,
ciscoLS1010ChassisPs1Status,
ciscoLS1010ChassisFanStatus,
ciscoLS1010Chassis12VoltStatus,
ciscoLS1010ChassisTempStatus
}STATUScurrentDESCRIPTION"Agent detects a change in the status of ps0, ps1,
fan, 12V line, and/or chassis temperature.
This notification will be generated when the status
changes from no-fault to fault, and also when the status
changes from fault to no-fault."::={ ciscoLS1010ChassisMIBNotifications 1}ciscoLS1010ChassisChangeNotification NOTIFICATION-TYPE-- no OBJECTSSTATUScurrentDESCRIPTION"Agent detects any hot-swap component change or changes
in the chassis."::={ ciscoLS1010ChassisMIBNotifications 2}
-- conformance informationciscoLS1010ChassisMIBConformance OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIB 3}ciscoLS1010ChassisMIBCompliances OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIBConformance 1}ciscoLS1010ChassisMIBGroups OBJECTIDENTIFIER::={ ciscoLS1010ChassisMIBConformance 2}-- compliance statementsciscoLS1010ChassisMIBCompliance MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"The compliance statement for entities which implement
the Cisco LS1010 Chassis MIB. This statement was
obsoleted by ciscoLS1010ChassisMIBComplianceRev1."MODULE-- this moduleMANDATORY-GROUPS{ ciscoLS1010ChassisMIBGroup }::={ ciscoLS1010ChassisMIBCompliances 1}
ciscoLS1010ChassisMIBComplianceRev1 MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"The compliance statement for entities which implement
the Cisco LS1010 Chassis MIB. This statement was
obsoleted by ciscoLS1010ChassisMIBComplianceRev2."MODULE-- this moduleMANDATORY-GROUPS{ ciscoLS1010ChassisMIBGroup,
ciscoLS1010ChassisMIBRev1Group }::={ ciscoLS1010ChassisMIBCompliances 2}ciscoLS1010ChassisMIBComplianceRev2 MODULE-COMPLIANCESTATUSobsolete-- superseded by ciscoLS1010ChassisMIBComplianceRev3DESCRIPTION"The compliance statement for entities which implement
the Cisco LS1010 Chassis MIB"MODULE-- this moduleMANDATORY-GROUPS{ ciscoLS1010ChassisMIBGroup,
ciscoLS1010ChassisMIBRev1Group,
ciscoLS1010ChassisMIBClockingGroup }
::={ ciscoLS1010ChassisMIBCompliances 3}-- ciscoLS1010ChassisMIBComplianceRev3 is superceded by
-- ciscoLS1010ChassisMIBComplianceRev4ciscoLS1010ChassisMIBComplianceRev3 MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"The compliance statement for entities which implement
the Cisco LS1010 Chassis MIB."MODULE-- this moduleMANDATORY-GROUPS{ ciscoLS1010ChassisMIBGroup1,
ciscoLS1010ChassisMIBClockingGroup }::={ ciscoLS1010ChassisMIBCompliances 4}ciscoLS1010ChassisMIBComplianceRev4 MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"The compliance statement for entities which implement
the Cisco LS1010 Chassis MIB."MODULE-- this moduleMANDATORY-GROUPS{ ciscoLS1010ChassisMIBGroup1,
ciscoLS1010ChassisMIBClockingGroup,
clsEnetPortGroup1,
clsPortLedGroup1 }::={ ciscoLS1010ChassisMIBCompliances 5}ciscoLS1010ChassisMIBComplianceRev5 MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"The compliance statement for the Cisco 6400 product."MODULE-- this moduleMANDATORY-GROUPS{ ciscoLS1010ChassisMIBGroup1,
ciscoLS1010ChassisMIBClockingGroup,
clsOperStatusGroup,
clsInletTempGroup }::={ ciscoLS1010ChassisMIBCompliances 6}ciscoLS1010ChassisMIBComplianceRev6 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for this MIB."MODULE-- this moduleMANDATORY-GROUPS{ ciscoLS1010ChassisMIBGroup2,
ciscoLS1010ChassisMIBClockingGroup }OBJECT ciscoLS1010ModuleSerialNumberString
SYNTAXDisplayString(SIZE(1..32))DESCRIPTION"Support for serial numbers longer than 32 characters
is not required."OBJECT ciscoLS1010SubModuleSerialNumberString
SYNTAXDisplayString(SIZE(1..32))DESCRIPTION"Support for serial numbers longer than 32 characters
is not required."::={ ciscoLS1010ChassisMIBCompliances 7}-- units of conformanceciscoLS1010ChassisMIBGroup OBJECT-GROUP
OBJECTS{
ciscoLS1010ChassisSysType,
ciscoLS1010ChassisBkplType,
ciscoLS1010ChassisPs0Type,
ciscoLS1010ChassisPs0AdminStatus,
ciscoLS1010ChassisPs0Status,
ciscoLS1010ChassisPs0Led,
ciscoLS1010ChassisPs1Type,
ciscoLS1010ChassisPs1AdminStatus,
ciscoLS1010ChassisPs1Status,
ciscoLS1010ChassisPs1Led,
ciscoLS1010ChassisFanStatus,
ciscoLS1010ChassisFanLed,
ciscoLS1010ChassisCardStatusLed,
ciscoLS1010ChassisEnetLinkLed,
ciscoLS1010Chassis12VoltStatus,
ciscoLS1010ChassisTempStatus,
ciscoLS1010ChassisPcmciaSlot0Type,
ciscoLS1010ChassisPcmciaSlot1Type,
ciscoLS1010ChassisNumSlots,
ciscoLS1010ChassisLastChange,
ciscoLS1010ChassisFailureAction,
ciscoLS1010ChassisChangeAction,
ciscoLS1010ChassisInletTempStatus,
ciscoLS1010ModuleType,
ciscoLS1010ModuleSerialNumber,
ciscoLS1010ModuleHwVersion,
ciscoLS1010ModuleSwVersion,
ciscoLS1010ModuleDescr,
ciscoLS1010ModuleNumSubModules,
ciscoLS1010ModuleAdminStatus,
ciscoLS1010ModuleOperStatus,
ciscoLS1010SubModuleType,
ciscoLS1010SubModuleSerialNumber,
ciscoLS1010SubModuleHwVersion,
ciscoLS1010SubModuleSwVersion,
ciscoLS1010SubModuleDescr,
ciscoLS1010SubModuleNumPorts,
ciscoLS1010SubModuleAdminStatus,
ciscoLS1010PortIfIndex,
ciscoAtmCpuAdminStatus,
ciscoAtmSwitchTotalBuffer,
ciscoAtmSwitchFreeBuffer,
ciscoAtmSwitchDiscardCells,
ciscoAtmSwitchInvalidCells,
ciscoAtmSwitchInvalidCellHeader
}STATUSobsoleteDESCRIPTION"A collection of objects providing rhino chassis information"
::={ ciscoLS1010ChassisMIBGroups 1}ciscoLS1010ChassisMIBObsoleteGroup OBJECT-GROUPOBJECTS{
ciscoAtmCpuTerminateOamFlow
}STATUSobsoleteDESCRIPTION"A collection of objects providing rhino chassis information
which are obsolete."::={ ciscoLS1010ChassisMIBGroups 2}ciscoLS1010ChassisMIBRev1Group OBJECT-GROUPOBJECTS{
ciscoLS1010SubModuleHwVersionMinor
}STATUScurrentDESCRIPTION"A collection of objects useful for reporting the hardware
version of sub-modules in the chassis."::={ ciscoLS1010ChassisMIBGroups 3}ciscoLS1010ChassisMIBClockingGroup OBJECT-GROUPOBJECTS{
ciscoLS1010ChassisClockingMode,
ciscols1010SystemClockSourceStatus,
ciscols1010SystemClockSourcePriority
}STATUScurrentDESCRIPTION"A collection of objects useful for managing clocking."::={ ciscoLS1010ChassisMIBGroups 4}ciscoLS1010ChassisMIBGroup1 OBJECT-GROUPOBJECTS{
ciscoLS1010ChassisSysType,
ciscoLS1010ChassisBkplType,
ciscoLS1010ChassisPs0Type,
ciscoLS1010ChassisPs0AdminStatus,
ciscoLS1010ChassisPs0Status,
ciscoLS1010ChassisPs0Led,
ciscoLS1010ChassisPs1Type,
ciscoLS1010ChassisPs1AdminStatus,
ciscoLS1010ChassisPs1Status,
ciscoLS1010ChassisPs1Led,
ciscoLS1010ChassisFanStatus,
ciscoLS1010ChassisFanLed,
ciscoLS1010ChassisCardStatusLed,
ciscoLS1010ChassisEnetLinkLed,
ciscoLS1010Chassis12VoltStatus,
ciscoLS1010ChassisTempStatus,
ciscoLS1010ChassisPcmciaSlot0Type,
ciscoLS1010ChassisPcmciaSlot1Type,
ciscoLS1010ChassisNumSlots,
ciscoLS1010ChassisLastChange,
ciscoLS1010ChassisFailureAction,
ciscoLS1010ChassisChangeAction,
ciscoLS1010ModuleType,
ciscoLS1010ModuleSerialNumber,
ciscoLS1010ModuleHwVersion,
ciscoLS1010ModuleSwVersion,
ciscoLS1010ModuleDescr,
ciscoLS1010ModuleNumSubModules,
ciscoLS1010ModuleAdminStatus,
ciscoLS1010SubModuleType,
ciscoLS1010SubModuleSerialNumber,
ciscoLS1010SubModuleHwVersion,
ciscoLS1010SubModuleSwVersion,
ciscoLS1010SubModuleDescr,
ciscoLS1010SubModuleNumPorts,
ciscoLS1010SubModuleAdminStatus,
ciscoLS1010SubModuleOperStatus,
ciscoLS1010SubModuleHwVersionMinor,
ciscoLS1010PortIfIndex,
ciscoAtmCpuAdminStatus,
ciscoAtmSwitchTotalBuffer,
ciscoAtmSwitchFreeBuffer,
ciscoAtmSwitchDiscardCells,
ciscoAtmSwitchInvalidCells,
ciscoAtmSwitchInvalidCellHeader,
ciscoAtmInterceptEndToEndOamFlow
}STATUSobsoleteDESCRIPTION"A collection of objects for managing the LS1010 chassis."::={ ciscoLS1010ChassisMIBGroups 5}clsEnetPortGroup1 OBJECT-GROUPOBJECTS{
clsEnetPortDuplex,
clsEnetPortAdminSpeed,
clsEnetPortType,
clsEnetPortLinkStatus
}STATUScurrentDESCRIPTION"A collection of objects for managing ethernet ports."::={ ciscoLS1010ChassisMIBGroups 6}
clsPortLedGroup1 OBJECT-GROUPOBJECTS{
clsPortLedType,
clsPortLedStatus
}STATUScurrentDESCRIPTION"A collection of objects for showing port LEDs."::={ ciscoLS1010ChassisMIBGroups 7}clsOperStatusGroup OBJECT-GROUPOBJECTS{
ciscoLS1010ModuleOperStatus,
ciscoLS1010SubModuleOperStatus
}STATUScurrentDESCRIPTION"A collection of objects for displaying operational status of
modules and sub-modules in the chassis."::={ ciscoLS1010ChassisMIBGroups 8}clsInletTempGroup OBJECT-GROUPOBJECTS{
ciscoLS1010ChassisInletTempStatus
}STATUScurrent
DESCRIPTION"A collection of objects for reporting inlet temperature."::={ ciscoLS1010ChassisMIBGroups 9}ciscoLS1010ChassisMIBGroup2 OBJECT-GROUPOBJECTS{
ciscoLS1010ChassisSysType,
ciscoLS1010ChassisBkplType,
ciscoLS1010ChassisPs0Type,
ciscoLS1010ChassisPs0AdminStatus,
ciscoLS1010ChassisPs0Status,
ciscoLS1010ChassisPs0Led,
ciscoLS1010ChassisPs1Type,
ciscoLS1010ChassisPs1AdminStatus,
ciscoLS1010ChassisPs1Status,
ciscoLS1010ChassisPs1Led,
ciscoLS1010ChassisFanStatus,
ciscoLS1010ChassisFanLed,
ciscoLS1010ChassisCardStatusLed,
ciscoLS1010ChassisEnetLinkLed,
ciscoLS1010Chassis12VoltStatus,
ciscoLS1010ChassisTempStatus,
ciscoLS1010ChassisPcmciaSlot0Type,
ciscoLS1010ChassisPcmciaSlot1Type,
ciscoLS1010ChassisNumSlots,
ciscoLS1010ChassisLastChange,
ciscoLS1010ChassisFailureAction,
ciscoLS1010ChassisChangeAction,
ciscoLS1010ModuleType,
ciscoLS1010ModuleHwVersion,
ciscoLS1010ModuleSwVersion,
ciscoLS1010ModuleDescr,
ciscoLS1010ModuleNumSubModules,
ciscoLS1010ModuleAdminStatus,
ciscoLS1010SubModuleType,
ciscoLS1010SubModuleHwVersion,
ciscoLS1010SubModuleSwVersion,
ciscoLS1010SubModuleDescr,
ciscoLS1010SubModuleNumPorts,
ciscoLS1010SubModuleAdminStatus,
ciscoLS1010SubModuleOperStatus,
ciscoLS1010SubModuleHwVersionMinor,
ciscoLS1010PortIfIndex,
ciscoAtmCpuAdminStatus,
ciscoAtmSwitchTotalBuffer,
ciscoAtmSwitchFreeBuffer,
ciscoAtmSwitchDiscardCells,
ciscoAtmSwitchInvalidCells,
ciscoAtmSwitchInvalidCellHeader,
ciscoAtmInterceptEndToEndOamFlow,
ciscoLS1010ModuleHwVersionMinor,
ciscoLS1010ModuleSerialNumberString,
ciscoLS1010SubModuleSerialNumberString
}STATUScurrentDESCRIPTION"A collection of objects for managing the
LS1010 chassis."::={ ciscoLS1010ChassisMIBGroups 10}ciscoLS1010ChassisMIBDeprecatedGroup OBJECT-GROUPOBJECTS{
ciscoLS1010ModuleSerialNumber,
ciscoLS1010SubModuleSerialNumber
}STATUSdeprecatedDESCRIPTION"A collection of objects providing rhino
chassis information which are obsolete."::={ ciscoLS1010ChassisMIBGroups 11}ciscoLS1010ChassisMIBNotificationGroup NOTIFICATION-GROUPNOTIFICATIONS{
ciscoLS1010ChassisFailureNotification,
ciscoLS1010ChassisChangeNotification
}STATUScurrentDESCRIPTION"A collection of notifications supported
by LS1010 chassis."::={ ciscoLS1010ChassisMIBGroups 12}END